Hey Friends, Are You Searching for How to Convert HDMI to VGA or VGA to HDMI? then we must say you land on the right post. Today in this post we are going to share a simple and easy hack for converting analog (VGA) for a digital connection format (HDMI, DVI, DisplayPort).
However, there are still situations where you may need to replace the display technologies, usually due to different ports on a PC and layout. Video signals may be changed in either direction (VGA to HDMI or HDMI to VGA), but there are certain conditions and time disputes.
So, If you don’t know how to do that or where to start then you can check this post out.
Difference Between VGA to HDMI and an HDMI to VGA Converter?
There is a profound difference.
VGA -> HDMI – Input is VGA and Output is HDMI.
If your display supports HDMI and your RPi provides HDMI output, then you can directly connect RPi HDMI port to HDMI port of the monitor.
HDMI->VGA – Input is HDMI and Output is VGA (Audio is lost).
If your display supports the only VGA but RPi is HDMI, then you need HDMI to VGA converter + (VGA to VGA cable).
hose are much cheaper and one will work in either direction. (It’s just a matter of connecting the right pairs of pins on either side.)
Easiest Way to Convert HDMI to VGA or VGA to HDMI
VGA to HDMI
In some situations, it may be necessary to send a VGA signal from a PC to an HDMI connection on a newer monitor, TV, or projector. Using a VGA to HDMI Converter, like the one shown in the image above, allows you to combine your computer to any device requiring an HDMI connection. But Before going forward, read some necessary and important Tips and Note which is given below.
If your PC only has a VGA connection and you have a desktop computer, you may also consider upgrading the video card in the PC.
This converter also adds a USB cable that takes the audio from your computer and holds it with the video signal. Some converters may have an audio cable, as well as a USB cable, for power Supply.
Converting VGA to HDMI OR HDMI to VGA on Computer
HDMI to VGA
An HDMI to VGA Converter may be a cheaper cable that can connect an HDMI signal from a computer to a VGA connection on an older display. Because VGA is an older technology than HDMI, this option should be bypassed unless there is no other choice. But due to lack of alternative, we should this on the system.
However, a VGA cable can only accept a video signal. An HDMI cable can send an audio and video signal over the same cable. If you need both audio and video, you need to buy a VGA converter cable, as well as an audio cable or USB with audio capability.
Signal Quality Considerations
Remember: Moving between these 2 technologies may cause you to experience a lack of video quality. VGA is the highest resolution from SVGA. It is only able of an 800 x 600-pixel resolution. Therefore, if your PC is sending out a higher resolution HDMI signal, it will be defined by the lower resolution of VGA.
Additionally, analog VGA signals are responsive to a decline of quality based on what their cables are produced and how well they are put together.
Hope you like this post having any quarries feel free to drop your comments down in the comments section. We will try to reply as early as possible. Don’t forget to share this post for more new articles you can subscribe and bookmark this site.